Exhaust Servo EXUP F1 light Eliminator Honda VFR1200 -Vizi-tec 10 yr warranty

Description

Honda VFR1200
(2010 - Present)
exhaust valve servo eliminator aka "HON.EE" is a digital solid-state electronic device that is designed and manufactured 100% right here in the US of A by vizi-tec. This product comes with a factory warranty of 10 years!
This device allows for the replacement of the servo actuator assembly as factory installed on some Honda motorcycles as part of the exhaust system integrated with the ECU. (ie: No CEL/FI/EXUP error messages). The unit allows you to get rid of the servo setup EXUP(SET) thus giving your bike improved performance and sound while allowing for a cleaner look. Leaving more room under the seat, save weight, and remove the servo cables to the exhaust butterfly valve that has been known to fail or problematic. A lot cheaper than to have it serviced by the dealer or constant replacement of the mechanical motor assembly. Product also works perfectly with quick shifters were some eliminator work but not with quick shifters!
(ie: No error messages)
Simple installation
1. Unplug and remove the factory exhaust valve actuator.
2. Remove cable(s) to the actual valve installed within the exhaust. The valve will default to the open position.
3. Plug the HON.EE into the factory wiring harness using the stock connectors.
4. Use the
provided tie wraps
to secure the HON.EE as desired.
5. Turn on your ignition and verify your Check Engine Light (FI) message is off. Done!
Unlike the other inferior plastic products out there. The HON.EE is controlled by a micro-processor that guarantees a constant servo position regardless of voltage fluctuation. The physical device is machined CNC from a single block and epoxied using automotive/marine grade products which makes this the best quality servo eliminator you can get for your Honda. 100% water/grease/dirt proof. And because of this we offer a 10 year warranty!
We try to be very competitive and do regulate our prices to reflect the market. And or pass the savings in terms of our production cost. If you see that our prices have dropped after your purchase, within 30 days we’ll match it.
Unit body: H = 8mm (0.315 inches), L = 24mm (0.945 inches), W = 35mm (1.378 inches), Mass = 20 grams (0.7 ounces). Product comes with tie wraps.
Works on the following motorcycles:
2008-present Honda CBR1000RR
2010-present Honda VFR1200
See our other listings for more selections.
We sell our products at a higher price on eBay to offset their fees.