CDI ECU Honda VT1100C2 Shadow Ace 1995-1996 SC32 Blackbox Ignitor (CD1906D)

Description

Price information:
Contact us for the total price including shipping cost
Price does not include TAX/VAT
=> this applies to
EUROPEAN CUSTOMERS ONLY
<=
=> not for retailers who have a valid TAX/VAT number <=
General information
• Digitally controlled CDI, made in Western Europe - no cheap Chinese **** -
and brand new => so you can be sure about the quality !
• Direct replacement: plugs straight into your current wiring loom
• Comes with 6 months warranty
• Price is for
ONE (1)
CDI-unit
Through the years the VT1100C 1987-1996 was equipped with different CDI units.
The only difference between the original CDI units is the presence or absence of a green/orange cable.
This cable is connected to the interlock system of the bike; and has to be grounded to make the bike run.
Since the part number is often difficult to find on the original CDI,
Wieltronics chose to combine the different units into one.
If your bike is equipped with this interlock cable:
Connect the green/orange cable to the green/orange cable from the wiring loom of the bike,
and leave the additional green cable disconnected.
If your bike is not equipped with the interlock cable:
Connect the green/orange cable to the green cable,
this will bypass the interlock system, and enable you to run the bike.
Below is a picture of the actual CDI unit you'll receive, featuring the green/orange and green cable:
CDI for the following models and years:
NAME
MODEL CODE
YEAR
VT1100C2 Shadow Ace
SC32
1995-1996
Replaces OEM codes:
30410-MAH-671
MAHA 502j.
This CDI can also be ordered as a
programmable
unit
The TuneBox software (screenshot on the right) allows you to:
• draw your own ignition-curve(s)
• adjust the rev-limiter(s)
• program up to two different curves into the CDI unit:
if you choose to order this CDI with the 2 curves option, a switch will be provided that connects to the CDI, and allows you to switch between the 2 curves (the switch can be mounted on the handlebar)
!! EXTRA OPTIONS WILL RAISE THE PRICE OF THE UNIT !!
• programmable CDI, single curve: +50$
• programmable CDI, two curves: +115$
!! INTERFACE AND TUNEBOX SOFTWARE !!
You'll need the interface and software to be able to
program your programmable CDI.
Click
here
to buy this on eBay. (Cost: 165$)
SAVE MONEY: BUY THE COMPLETE SET
Two curves programmable CDI + curves switch + interface + software
FOR ONLY 5 !!!!