1050mm/ 42" 1¼m Magnetic Linear Scale Digital Readout Encoder DRO Lathe Mill

Description

1050mm/ 42" 1¼m Magnetic Linear Scale Digital Readout Encoder DRO Lathe Mill
Ultra compact size makes the EH-01 ideal for limited space mounting, including the lathe cross or compound slide and milling machine quillA non contact system with fully sealed encapsulated reading head. Highly resistant to cutting oil and contaminationFitted with a flexible armoured cable and connectorAdditional interfaces are available to combine axis or convert the output to suit other manufacturer's equipmentThe rigid support profile has a recessed slot for the tape, with a stainless steel cover strip that slides in over the top to fully cover the tapeThe profile is pre-drilled with mounting holes. Additional fixings can also be drilled as requiredThe profile can easily be cut to length to best suit the install requirementsFor compatible display consoles please check the display console compatibility guide belowPlease feel free to contact our technical staff for assistanceMachine-DRO History - A division of Allendale Electronics, a family run British company founded in 2004. Our roots are firmly based in the UK, with a head office, engineering and inspection department at our works in Hoddesdon, Hertfordshire. We pride ourselves on being a measuring tool specialists offering tools, services, advice and expertise to our end customers and international distributor networkKey SpecificationsReading Length - 1050mm (42")Resolution - 0.001mmEncoder Type - MagneticEncoder Output - TTL (A, B and Z) QuadratureCable Type - Flexible ArmouredCable Length - 3 MetresProtection - IP67 Additional InformationM-DRO EH-05 Magnetic Linear Encoder - technicalLinear Encoder Comparison - technicalDisplay Console Compatibilty Guide - technicalDigital Readout Selection Guide - technicalOn-site Installation Service Guide - area map
Machine Tapping
Browse Shop
About Us
Feedback
Contact
Part No |
DRO-EH-01-1050
1050mm/ 42" 1¼m Magnetic Linear Scale Digital Readout Encoder DRO Lathe Mill
Ask Question
Save Seller
SHORT DESCRIPTION
M-DRO EH-01 linear magnetic encoder with 1050mm (42") reading length. A compact encoder profile suitable for a wide range of machine tool, XY tables, jigs and metrology applications. The encoder beam can be cut to length to suit install.
FULL UK SUPPORT
We offer full UK support on all the products we sell. Please feel free Contact us by phone or email if you have any queries regarding our products
SAME DAY DISPATCH
Same day despatch on all items ordered before 15:00 GMT
Description
Ultra compact size makes the EH-01 ideal for limited space mounting, including the lathe cross or compound slide and milling machine quill
A non contact system with fully sealed encapsulated reading head. Highly resistant to cutting oil and contamination
Fitted with a flexible armoured cable and connector
Additional interfaces are available to combine axis or convert the output to suit other manufacturer's equipment
The rigid support profile has a recessed slot for the tape, with a stainless steel cover strip that slides in over the top to fully cover the tape
The profile is pre-drilled with mounting holes. Additional fixings can also be drilled as required
The profile can easily be cut to length to best suit the install requirements
For compatible display consoles please check the display console compatibility guide below
Please feel free to contact our technical staff for assistance
Machine-DRO History
- A division of Allendale Electronics, a family run British company founded in 2004. Our roots are firmly based in the UK, with a head office, engineering and inspection department at our works in Hoddesdon, Hertfordshire. We pride ourselves on being a measuring tool specialists offering tools, services, advice and expertise to our end customers and international distributor network
Key Specifications
Reading Length - 1050mm (42")
Resolution - 0.001mm
Encoder Type - Magnetic
Encoder Output - TTL (A, B and Z) Quadrature
Cable Type - Flexible Armoured
Cable Length - 3 Metres
Protection - IP67
For further product information please feel free to contact us
About us
Machine DRO are suppliers of Digital Readout Systems, Measuring Tools, Machine Tools.
Established in the UK in 2003 and we pride ourselves on providing top quality tools and equipment with professional customer service and support to both professionals and hobbyists.
Ebay links
Our Store
Other Items
Feedback
Send message
eBay integration
by
Ultra compact size makes the EH-01 ideal for limited space mounting, including the lathe cross or compound slide and milling machine quillA non contact system with fully sealed encapsulated reading head. Highly resistant to cutting oil and contaminationFitted with a flexible armoured cable and connectorAdditional interfaces are available to combine axis or convert the output to suit other manufacturer's equipmentThe rigid support profile has a recessed slot for the tape, with a stainless steel cover strip that slides in over the top to fully cover the tapeThe profile is pre-drilled with mounting holes. Additional fixings can also be drilled as requiredThe profile can easily be cut to length to best suit the install requirementsFor compatible display consoles please check the display conso